slogan

Wire Rope

High Performance Ropes

DYFORM 6 & FLEX-X 626

Compacted construction provides higher strength, better banding life and greater abrasion resistance than 6 X 25 ropes. Dyform 6 & Flex-x 626 are commonly used in boom hoist, load hoist, winch lines, holding, closing, crowd and retract lines, Ore bridges and ore unloaders. Other common application include Stripper, soaking pit, hot metal, scrap yard mobile and overhead traveling cranes, Hot bed conveyors, Car haulage, Marine cargo fails.

High Performance Wire Rope
DYFORM - 6
Dia. (in.) Nominal Strength in US Tons Approx. Weight per foot (LBS)
3/8" 8.8 0.3
7/16" 11.9 0.4
1/2" 15.3 0.5
9/16" 19.2 0.6
5/8" 22.7 0.8
3/4" 32.3 1.1
7/8" 43.8 1.5
1" 56.9 2.0
1 1/8" 71.5 2.5
1 1/4" 87.9 3.1
1 3/8" 106.0 3.8
1 1/2" 125.0 4.5

Dyform 18 & Flex-x 19

Excellent strength to diameter ration for resistance to abrasion and crushing as well as better bonding characteristics… increased fatigue resistance. Ideal for applications where spooling problems, drum crushing, bird caging, block twisting and fast line speeds are likely to be encountered.

DYFORM - 18
Dia. (in.) Nominal Strength in US Tons Approx. Weight per foot (LBS)
1/4" 3.7 0.13
5/16" 5.8 0.21
3/8" 8.3 0.31
7/16" 11.2 0.40
1/2" 14.6 0.54
9/16" 18.5 0.69
5/8" 22.7 0.85
3/4" 32.4 1.25
7/8" 43.8 1.68
1" 56.9 2.17
1 1/8" 71.5 2.75
1 1/4" 87.9 3.45
1 3/8" 106.0 4.33
1 1/2" 125.0 5.11

Then Dyform 34LR & 35LS

Dyform-34LR is the strongest, most rotation resistant wire rope manufactured with compacted strands. Dyform 34LR is made in a multi-layer construction with the outside strand laid in a direction opposite to the inside strands. All Dyform 34LR is made with wire strand core and is inventoried in sizes 5/8" through 1 1/8" diameter (other sizes available upon request) Dyform 35LS

35LS is one of the strongest, rotation resistant wire ropes, comparable in rotation resistance with Dyform 34LR, and is used for demanding applications where highest strength is not mandatory. 35LS is manufactured in a multi layered construction with the outside strands laid in a direction opposite to the inside strands. All 35LS is made with a wire strand core.

DYFORM 34LR & 35LS
DIAMETER APPROX. WEIGHT PER FOOT (LBS) MINIMUM BREAKING FORCE   TONS (2000 LBS.)
1960 2160
MM Inches 34LR 35LS 35LS 34LR 34LR
  1/2" 0.54 0.49 15.4 13.6 17.42
13   0.57 0.51 16.19 14.28 18.21
14   0.65 0.6 18.88 16.52 21.13
  9/16" 0.69 0.62 19.67 17.31 22.03
15   0.77 0.69 22.03 19.11 24.73
16 5/8" 0.87 0.78 25.18 21.69 28.21
17   0.94 0.87 27.2 24.28 30.46
18   1.07 0.97 30.8 27.09 34.62
19 3/4" 1.2 1.11 34.51 30.91 38.67
20   1.32 1.21 38.33 33.61 42.94
21   1.49 1.34 43.28 37.43 48.45
22   1.61 1.49 46.65 41.37 52.38
  7/8" 1.65 1.51 47.21 41.59 53.06
23   1.75 1.61 50.69 44.74 56.88
24   1.92 1.77 55.65 49.35 62.38
25   2.1 .1.91 60.59 52.94 67.89
  1" 2.16 1.97 62.38 54.4 70.03
26   2.28 2.08 66.09 57.78 74.19
28   2.63 2.41 75.99 66.99 85.2
  1 1/8" 2.7 2.5 77.45 68.9 86.89
30   2.99 2.74 86.44 75.99 97.01
32 1 1/4" 3.39 3.1 98.13 85.99 110.16
35 1 3/8" 4.05 3.82 116.9 105.89 123.65
38 1 1/2" 4.78 4.35 138.26 120.27 147.25

Constructex

Swaged to increase wearing surface and density. Can provide 1 ½ to 2 time service life of other tubing lines to its resistance to scrubbing and crushing and increased life. Greater flexibility provides easier handling. Constructex is commonly used in tubing lines, logging lines, winch lines, boom hoist, scrap yard, mobile and overhead traveling cranes, ore unloaders and ore bridges as well as Hot bed conveyors and car haulage.

CONSTRUCTEX
DIAMETER (IN.) NOMINAL STRENGTH US TONS APPROX. WEIGHT PER FT. (LBS)
5/8" 25.5 0.86
3/4" 36.5 1.1
7/8" 48.5 1.5
1" 62.5 2
1 1/8" 79.5 2.6
1 1/4" 97.5 3.2
1 3/8" 118 3.8
1 1/2" 139 4.6
1 5/8" 162 5.3